How do I add an ND filter to a DJI Mavic 3 Pro?

Q: How do I add an ND filter to a DJI Mavic 3 Pro?

Fit your ND filter by following the steps listed below: Hold the Gimbal: Securely hold the gimbal to prevent movement. Remove the Front Filter: Turn the front filter counterclockwise to remove it. Position the New Filter: Tilt the new filter at a 45-degree angle. Align the Connectors: Line up the filter’s connectors with the notches on the front of the drone. Attach the New Filter: Twist the filter clockwise until it clicks into place. Adjust the Filter: Angle the filter back up to match its original position.

Question

Accepted Answer

Fit your ND filter by following the steps listed below:

Hold the Gimbal: Securely hold the gimbal to prevent movement.
Remove the Front Filter: Turn the front filter counterclockwise to remove it.
Position the New Filter: Tilt the new filter at a 45-degree angle.
Align the Connectors: Line up the filter’s connectors with the notches on the front of the drone.
Attach the New Filter: Twist the filter clockwise until it clicks into place.
Adjust the Filter: Angle the filter back up to match its original position.