DJI OM 4 Mobile Gimbal Tutorials

So you've finally gt your hands on the .

But how do you actually use it?

This guide will take you step by step through how to setup and start using the .

• Activating Your DJI OM 4

• How to Change From Video to Photo Mode on DJI OM 4

• How to Switch from Portrait to Landscape mode on OM 4

• How to Zoom with DJI OM 4

• How to Control The Gimbal on DJI OM 4

• How to recentre the DJI OM 4 Gimbal

• How to Start Recording on DJI OM 4

• How to put DJI OM 4 into Standby Mode

Activating Your DJI OM 4

1. Download and install the DJI Mimo in preparation - available on iOS and Android.

2. Choose either the Magnetic Phone Clamp or Magnetic Ring Holder to use with your mobile device.

3. Install the Grip Tripod to the bottom of the DJI OM 4 by lining up the screw on the Grip Tripod with the ¼” on the base of the OM 4 and tighten until the points are aligned.

4. Unfold the tripod legs to keep the OM 4 steady while you continue the rest of the setup.

5. Place the magnetic phone clamp on the centre of the phone, pulling the legs apart slightly if needed. Make sure the DJI logo on the phone clamp and your phone camera are facing the same direction.

6. Now, simply unfold the gimbal by pulling it up from its folded position.

7. Align the phone clamp with the magnetic point on the gimbal and simply hold your phone close enough to the magnetic circle on the gimbal so it snaps into position.

8. If you prefer to use the Magnetic Ring holder rather than the Clamp, you’ll need to take a few extra steps: Clean the back of the phone with the included Wet Cleaning Wipe.

9. Now that your phone is mounted on the OM 4 gimbal, you can turn it on by holding the M button at the bottom right of the control panel.

10. Enable Bluetooth on your phone and open the DJI Mimo app.

11. Login or register with your DJI account - and follow the prompts to Activate your OM 4.

12. You’re now ready to use your OM 4 to capture memories. Simply click the camera icon at the top left of the Mimo app to switch to camera view and start snapping.

How to Change From Video to Photo Mode on DJI OM 4

1. Ensure you’re in Camera View in the Mimo app.

2. To switch from photo to video mode, simply tap the “M” button at the bottom right of the control panel.

3. Tap the “M” button again to return to Photo mode.

How to Switch from Portrait to Landscape mode on OM 4

1. Ensure you’re in Camera View in the Mimo app.

2. Tap the “M” button twice to switch from Portrait to Landscape mode.

3. Tap the “M” button twice again to switch from Landscape to Portrait mode.

How to Zoom with DJI OM 4

1. Ensure you’re in Camera View in the Mimo app.

2. To zoom in, push the Zoom slider on the left hand of the OM 4 up (towards the T marker).

3. Push the Zoom slider down towards the W marker to zoom out.

How to Control The Gimbal on DJI OM 4

1. Ensure you’re in Camera View in the Mimo app.

2. The Joystick on the DJI OM 4 control panel is how you’ll control the gimbal's movement.

3. Move the joystick Up or Down to control the Pitch of the gimbal.

4. Move the joystick Left or Right to control the Pan of the gimbal.

How to Recentre the DJI OM 4 Gimbal

1. Ensure your Phone and the OM 4 are connected.

2. Tap the trigger on the OM 4 handle three times to switch from using the front camera to using the rear camera or visa versa.

How to Start Recording on DJI OM 4

1. Open the DJI Mimo app.

2. Click the camera icon in the top left corner of the app to enter the camera view.

3. Click the “M” button until you enter the required video mode.

4. Simply tap the shutter button once to start recording.

How to put DJI OM 4 into Standby Mode

1. Press and hold the “M” button until you hear a single beep.

2. Wait for the gimbal to come to a stop in its standby position.

3. To exit standby mode, simply press the trigger once.