Rental Emlid Reach RS3 & Survey Pole

Purchase Price: £2,998

Base Price

£NaN

Delivery & Collection Price

£20.00

Insurance

Hired-in equipment

Please book your rental online at least 48 hours in advance. If you require it sooner, kindly call us

Rent the Emlid Reach RS3 - a GNSS receiver that facilitates precision survey data collection.

  • Emlid Reach RS3 Multi-band GNSS receiver featuring IMU tilt compensation, providing survey-grade data acquisition in tricky locations.

  • About This Rental Combo Includes the Emlid Reach RS3 receiver and the Emlid Survey Pole. This rental does not include a network subscription - please source this separately.

  • Rental Benefits Hiring the Emlid Reach RS3 is more cost-effective than an outright purchase and enables you to access the technology only when you need it.

Rental Emlid RS3 GNSS Receiver and Emlid Survey Pole.

What Do I Need To Book A Rental?

Provide us with some key documents - then enjoy your hire

  • Insurance

    Insure your rental under a Hired-in (non-owned) equipment cover policy - to the full cost value of the equipment and for the duration of your hire period.

  • Proof of ID

    After check-out, submit a copy of your passport or driving licence, plus a utility, bank, or council tax statement that matches your name/delivery address.

  • Flyer ID

    If you hire a drone from heliguy™, you also need a valid Flyer ID and Operator ID. We don't require proof of drone registration or training (A2 CofC/GVC).

Learn More About heliguy™ Rental

Emlid RS3 Tilt Compensation

Accurate Results, Even With Large Tilt Angles

  • Tilt Compensation: The IMU-based tilt compensation in Reach RS3 enables you to make measurements with up to 60° of tilt while still staying within 20mm of accuracy. Reach RS3 continuously measures and corrects tilt in real time to keep you on target.

  • Immune to Magnetic Disturbances: Unaffected by magnetic fields, RS3’s IMU sensors provide robust tilt compensation even when working close to metal structures.

  • Quick Initialisation: Tilt initialisation takes about 20 metres of walking or 10-20 seconds of tilting.

  • Calibration-Free: The IMU in each device is calibrated at the factory so you can get your Reach RS3 up and running right out of the box.

Rapid and Reliable GNSS receiver

Centimetre-Accuracy in Seconds

  • Gets a fix in 5 seconds: Reach RS3 obtains a centimetre-accurate solution in about 5 seconds. It maintains robust performance, even when the sky view is partially obstructed, or the receiver is tilted.

  • RINEX logging and PPP support: Record raw data in the RINEX format for post-processing. Use Emlid's free PPK software, Emlid Studio, or any other software that supports RINEX. Logs are also compatible with OPUS, AUSPOS, and PPP services.

  • Built-in LTE modem: Insert a SIM card into your Reach RS3 and let it broadcast or receive corrections via NTRIP.

  • Utilise Emlid Ecosystem: Integrate RS3 into the existing Emlid ecosystem, such as combining the RS2+ base with the RS3 rover, or deploying the RS2+ base with an external radio and RS3 rover.

Corrections From Multiple Sources

Obtain Corrections from CORS, Reach, or 3rd-Party Base Stations

  • Base and Rover: Work in RTK with VRS or a single baseline CORS network. You can also connect another GNSS receiver as an NTRIP base using Emlid NTRIP Caster. Compatibility: Any receiver with RTCM3 support

  • Dual-band Radio: Perfect for areas with no internet coverage for NTRIP. LoRa is used when connecting Emlid receivers over the radio. Compatibility: All Emlid receivers with built-in radios.

  • UHF 450 MHz: Mix and match RTK receivers within your fleet. Configure your Reach RS3 to receive corrections from an existing base. Or use a high-power external radio on your Reach base and connect with the UHF radio receiver in Reach RS3. Compatibility: Bases with radios that transmit TRIMTALK 450S.

Rugged And Compact

Robust Receiver From All Weather Conditions

  • Waterproof: RS3 is IP67 rated. It is waterproof up to a metre in depth. Silicone plugs completely seal and protect all connectors from water and dust.

  • Industrial Battery: The Reach RS3 Li-Ion battery can sustain more than 2,000 cycles of charging and discharging while maintaining its original capacity.

  • Long Runtime: Reach RS3 can endure up to 22 hours of logging or 18 hours of working with tilt in RTK.

  • Large Operational Envelope: Reach RS3 can operate in temperatures from -20ºС to +65ºС.

  • Impact-resistant: The body of the Reach RS3 is made of polycarbonate and coated with elastomer. This makes Reach RS3 drop-resistant and ready for the harshest conditions.

Emlid Software Suite

Software for the Field and the Office

Emlid GNSS Receivers can be used in conjunction with the Emlid software suite. Multiple options are available. Speak to our in-house surveying team to discuss the best software package for you.

  • Emlid Flow App: Mobile app that efficiently manages all field-related tasks, including receiver configuration, RINEX logging, data collection, and stakeout.

  • Emlid Flow 360: Access your survey data via the cloud-based Emlid Flow 360. It allows you to prepare, manage, and export your projects from a browser.

  • Emlid Studio: Emlid's free post-processing software for macOS and Windows. Use for kinematic processing, static processing, RTK drone data processing, and raw data analysis.

  • Emlid Caster: Connect up to 10 rovers to your base station via the internet or set up your own NTRIP network with Emlid Caster.

Why you should buy from heliguy™?

Comprehensive, lifetime assistance to help you start and scale your operations.

  • Streamlined Delivery

    Free Next Day Shipping Over £99 and 50-Day Free Returns on Faulty Items.

  • Trusted UK Partner

    20 years in UAVs, expertise in repairs, servicing, training, and insurance.

  • UK Support

    In-country technical support line staffed by four trained technicians.

  • ShopPay
  • GPay
  • Amex