How To Link DJI FPV Drone With Goggles And Remote Controller

This tutorial blog will teach you how to link the DJI FPV Drone with the DJI FPV Goggles V2 and the DJI FPV Remote Controller 2.

If you replace any DJI FPV device, for example, the remote controller or the aircraft, you will need to link the devices again.

Before linking, make sure that the goggles, aircraft, and remote controller are all powered on with sufficient battery levels.

Please note that the devices in the DJI FPV Combo are already linked and do not require linking before use.

For more information about the FPV Drone and Combo, read our hands-on review.

For more information about flying the DJI FPV Drone, read our Beginner's Guide tutorial or How To Use The DJI Motion Controller guide.

Linking The DJI FPV Drone With The Goggles

1. Press the linking button on the goggles once and you will hear a beeping noise.

2. Press and hold the aircraft power button for five seconds until the battery level LED blinks and there is a beeping noise.

3. Wait between 5 to 30 seconds for the goggles to link with the aircraft.

The aircraft battery LED will turn solid and display the battery level. The goggles will stop beeping and the live view from the camera will be displayed in the goggles.

Linking The DJI FPV Drone With The Goggles

1. When the goggles are powered on, link the remote controller with the aircraft...

2. Press and hold the remote controller power button for 5 seconds until the battery LED blinks in sequence and there is a beeping noise.

3. Wait between 5 to 30 seconds for the goggles to link with the aircraft. The aircraft battery LED will turn solid and display the battery level.

All devices have been successfully linked.